For these series of modules the solar cells are cut in two and divided in two parallel groups. With this the internal resistance is decreased and the receptive capacity is increased.
Available with M2, G1 or M6 cells.
Full Black modules with G1 half cells can be found in the Black series section.
Modules with 166 mm cells
DM385M6-60HSW
375 | 380 | 385 Wp
DM370M6-60HBB
360 | 365 | 370 Wp
DM460M6-72HSW
450 | 455 | 460 Wp
Modules with G1 cells and anodized aluminum frames
DM340G1-60HSW
120 monocrystalline half cells
330 | 335 | 340 Wp
DM370G1-66HBW
132 monocrystalline half cells
360 | 365 | 370 Wp
DM410G1-72HSW
144 monocrystalline half cells
400 | 405 | 410 Wp
DM340G1-60HBW
120 half cells; anodized black aluminum frame
330 | 335 | 340 Wp
DM410G1-72HBW
144 half cells; anodized black aluminum frame
400 | 405 | 410 Wp
DM440G1-78HSW
156 half cells, anodized aluminum frame
430 | 435 | 440 Wp
The stylish and sober appearance of the solar modules in our ‘Black Series’ make them aesthetically very suitable for visible roofs of residential projects or professional environments.
‘Black series’ modules have M6 G1 or m2 monocrystalline cells, a black backsheet or screenprinted glass, and an anodized black aluminum frame.
Modules with half cut G1 cells
DM330G1-60HBB
120 half cells, 320 | 325 | 325 Wp
DM365G1-66HBB
132 half cells, 355 | 360 | 365 Wp
DM395G1-72HBB
144 half cells, 385 | 390 | 395 Wp
DM325G1-60BB
60 cells, 315 | 320 | 325 Wp
DM360G1-66BB
66 cells, 350 | 355 | 360 Wp
DM385G1-72BB
72 cells, 375 | 380 | 385 Wp
DM310G1-60BU
60 cells, 300 | 305 | 310 Wp
DM330G1-66BU
66 cells, 320 | 325 | 330 Wp
Most solar modules have glass plates on the front side, protecting the solar cells from weather influences and dirt. By placing a second glass plate at the back side, instead of the traditional foil, the life duration of the panel increases significantly.
There are double glass panels with mono- or polycrystalline cells. The EVA can be white, black or transparent and the anodized aluminium frames are black or silver colored. Frameless is also possible.
DM340G1-G60HSW
120 G1 half cells, 330 | 335 | 340 Wp
DM370G1-G66HSW
132 G1 half cells, 360 | 365 | 370 Wp
DM340G1-G60HBW
120 G1 half cells, 330 | 335 | 340 Wp
DM325G1-G60BB
60 G1 cells, 315 | 320 | 325 Wp
DM325G1-G60BT
60 G1 cells, 315 | 320 | 325 Wp
DM330G1-G60HBT
120 G1 half cells, 320 | 325 | 330 Wp
The combination of monocrystalline cells with white backsheets guarantee the highest efficiencies.
The modules in this section have full size G1 cells, and silver colored frames.
Other modules with white backsheets can be found in the Half Cell and Double Glass sections.
DM330G1-60SW
60 G1 cells, 320 | 325 | 330 Wp
DM365G1-66SW
66 G1 cells, 355 | 360 | 365 Wp
DM395G1-72SW
72 G1 cells, 385 | 390 | 395 Wp
On earth, sun rays mostly come from above, under an angle. Unless you are standing on the equator, at noon. The rays are often reflected by clouds, water surfaces or buildings.
To generate electricity from rays from different angles, DMEGC Solar developed Bifacial cells. These cells are placed in transparent double glass modules.
The efficiency improvement depends strongly on the positioning of the module and the color and structure of the reflective surfaces under or near it. If these surfaces are white or have a light colour, the output will be further optimized.
Check the datasheets for the Bifacial gain indications.
Bi-facial module can be installed in:
• Flat roof installations, on a light colored or white roof, or covered with reflective foil
• Floating installations. The water will reflect much of the sun rays to the back.
• Vertical set-ups, for instance sound barriers or facades.
DM315M2-B60ST
60 M2 Bifacial cells, 305 | 310 | 315 Wp*
DM390G1-B72ST
72 G1 Bifacial cells, 380 | 385 | 390 Wp*
DM395G1-B72HST
144 G1 Bifacial half cells, 385 | 390 | 395 Wp*
* without Bifacial gain. Check the datasheets for the Bifacial gain indications.
Nowadays polycrystalline modules are mostly used in cost-sensitive large scale projects.
These installations are often realized on flat roofs or in ground installations like solar fields.
DM300P1-60SW
60 cells, 290 | 295 | 300 Wp
DM305P1-60SW
120 half cells, 295 | 300 | 305 Wp
DM355P1-72SW
72 cells, 345 | 350 | 355 Wp
DM360P1-72HSW
144 half cells, 350 | 355 | 360 Wp
Most PV systems consist of a series of solar modules (a string) and one or more inverters, to convert the output of the modules to 220/230 Volts AC.
A drawback of this system is that the least performing module (possibly due to orientation, leaves or shadow) is decreasing the output of the other modules in the string. This problem can be avoided with Power Optimizers or Micro Inverters. These can be preinstalled by DMEGC solar.
Solar Edge power optimizers
Constantly track the the performance of each module and communicate performance data to the SolarEdge monitoring portal, making it possible to optimize the whole PV-system. Recommended for installations with multiple orientations, tilts and module types in the same string.
DM320G1-60BB S
60 cells, Full Black, 40mm frame, 310 | 315 | 320 Wp
DM320M2-60SW S
60 cells, 40mm frame, 310 | 315 | 320 Wp
Enphase Micro Inverters
In stead of string inverters, Enphase Micro Inverters (EMI) are converting the power per module, so each module can perform at its best. EMI’s also make it possible to combine different types of modules in one system and make installation easier.
DM320-M158-60BK 40mm EMI
60 cells, black backsheet and frame
305 | 310 | 315 | 320 Wp